Oskom Forums

Oskom Forums


Добро пожаловать на Oskom Forums.
 
 
Сейчас на шардах UO Oskom
 
+ Ответить в теме
Показано с 1 по 12 из 12
  1. Apprentice

    Регистрация
    28.05.2004
    Адрес
    [Sith]\Чепчег[Нефармат]\
    Сообщений
    199
    #1

    По умолчанию Герцовка монитора в Ubuntu

    Короче это не столкько проблема Ubuntu как многих линуксов вобще. Как там поставить герцовку монитора выше 85 герц??? Один раз жестко поменял вся система умерла. Да ubuntu 6.06 LTS

  2. Grandmaster

    Регистрация
    11.10.2004
    Адрес
    Dominatio Violentia
    Сообщений
    1,799
    #2

    По умолчанию

    /etc/xorg/xorg.conf

  3. Apprentice

    Регистрация
    28.05.2004
    Адрес
    [Sith]\Чепчег[Нефармат]\
    Сообщений
    199
    #3

    По умолчанию

    Сэнк, рестартнусь проверим

  4. Grandmaster

    Регистрация
    11.10.2004
    Адрес
    Dominatio Violentia
    Сообщений
    1,799
    #4

    По умолчанию

    надеюсь ты знаешь где и что править?

  5. Apprentice

    Регистрация
    28.05.2004
    Адрес
    [Sith]\Чепчег[Нефармат]\
    Сообщений
    199
    #5

    По умолчанию

    Епт, ну если дал файл конфига ясен пень разберусь. Хотя если есть подводные камни обьясни ) А то в первый раз тоже что то в файле поменял, и пошло поехало.

  6. Grandmaster

    Регистрация
    11.10.2004
    Адрес
    Dominatio Violentia
    Сообщений
    1,799
    #6

    По умолчанию

    Подводных нет, в конец листай.
    У меня к моему монику книжка есть с таблицей разрешений и герцовкой. Я оттуда все списал, что надо. Хотя ладно, там все прекрасно расписано + есть примеры. Отпишись потом. Помогло или нет?

  7. Apprentice

    Регистрация
    28.05.2004
    Адрес
    [Sith]\Чепчег[Нефармат]\
    Сообщений
    199
    #7

    По умолчанию

    Да с утра отпишусь скорее всего, но все равно спасибо. Просто у меня раньше стоял пятый убунту, потом я его снес, раздел тоже убрал с винча линуховый, а теперь вот пришли мне диски с новым запустил его с CD, все зашибись, только не помню как НТФС разделы подмаунтить и герцовку в норму привести ) НО если нтфс это проблема уже решенная ранее, то герцовка нет

  8. Apprentice

    Регистрация
    28.05.2004
    Адрес
    [Sith]\Чепчег[Нефармат]\
    Сообщений
    199
    #8

    По умолчанию

    Не ахтунг, не разобрался что менять. Есть блок "Screen" в нем для разных параметров Depth указаны разрешения. Макс Depth - 24. С резолюшином связанного ничего вобще не видел

  9. Grandmaster

    Регистрация
    11.10.2004
    Адрес
    Dominatio Violentia
    Сообщений
    1,799
    #9

    По умолчанию

    Вах.
    Жди. Ща зайду в никсы и отпишу здесь кусок файла своего.

  10. Grandmaster

    Регистрация
    11.10.2004
    Адрес
    Dominatio Violentia
    Сообщений
    1,799
    #10

    По умолчанию

    Вот
    Код:
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
        Identifier  "Hitachi CML170SXW Plus"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        HorizSync   31.5 - 80.0
    
    #    HorizSync	30-64         # multisync
    #    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        VertRefresh 56.3 - 75.0
    
    EndSection

  11. Apprentice

    Регистрация
    28.05.2004
    Адрес
    [Sith]\Чепчег[Нефармат]\
    Сообщений
    199
    #11

    По умолчанию

    Сенки ) Он видимо монитор тупо определил. Попробую.

  12. Grandmaster

    Регистрация
    11.10.2004
    Адрес
    Dominatio Violentia
    Сообщений
    1,799
    #12

    По умолчанию

    Шоб у тя не возникало проблем с идентификаторами держи:
    Код:
    # File generated by xorgconfig.
    
    #
    # Copyright 2004 The X.Org Foundation
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # 
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # 
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # 
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    #
    
    # **********************************************************************
    # Refer to the xorg.conf(5x) man page for details about the format of 
    # this file.
    # **********************************************************************
    
    # **********************************************************************
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the font modules
        Load        "type1"
    #    Load        "speedo"
        Load        "freetype"
    #    Load        "xtt"
    
    # This loads the GLX module
        Load       "glx"
        
    # This loads the DRI module
    #    Load       "dri"
    
    EndSection
    
    # **********************************************************************
    # Files section.  This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    
        RgbPath	"/usr/X11R6/lib/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # 
    # 
    
        FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/"
        FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"
    
    # The module search path.  The default path is shown here.
    
    #    ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    #    Option "NoTrapSignals"
    
    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    
    #    Option "DontVTSwitch"
    
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    
    #    Option "DontZap"
    
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    
    #    Option "Dont Zoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    #    Option "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client. 
    
    #    Option "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings. 
    
    #    Option "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    
    #    Option "AllowNonLocalModInDev"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
        Identifier	"Logitech Office Internet Keyboard"
        Driver	"kbd"
    
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option     "Protocol"      "Xqueue"
    
        Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option	"Xleds"      "1 2 3"
    
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    
    #    Option "XkbDisable"
    
        Option "XkbRules"	"xorg"
        Option "XkbModel"	"pc101"
        Option "XkbLayout"	"en,ru(winkeys)"
        Option "XkbOptions"	"grp:ctrl_shift_toggle,grp_led:scroll"
    
    EndSection
    
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier	"Logitech S9"
        Driver	"mouse"
        Option 	"Protocol"    "PS/2"
        Option 	"Device"      "/class/input/input1"
    
    # Mouse-speed setting for PS/2 mouse.
    
        Option "Resolution"	"256"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"	"Xqueue"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"	"9600"
    #    Option "SampleRate"	"150"
    
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
        Option "ZAxisMapping" "4 5"
    
    EndSection
    
    
    # **********************************************************************
    # Other input device sections 
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # **********************************************************************
    #
    # Section "InputDevice" 
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
        Identifier  "Hitachi CML170SXW Plus"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        HorizSync   31.5 - 80.0
    
    #    HorizSync	30-64         # multisync
    #    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        VertRefresh 56.3 - 75.0
    
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    #Section "Device"
    #    Identifier	"Standard VGA"
    #    VendorName	"Unknown"
    #    BoardName	"Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset	"generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
    #    Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    
    #    BusID      "PCI:0:10:0"
    
    #    VideoRam	256
    
    #    Clocks	25.2 28.3
    
    #EndSection
    
    # Device configured by xorgconfig:
    
    Section "Device"
        Identifier  "ASUS V7100 Pro"
        Driver      "nvidia"
        #VideoRam    32768
        # Insert Clocks lines here if appropriate
        
        Option	"NoLogo"	"1"
        
    EndSection
    
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "ASUS V7100 Pro"
        Monitor     "Hitachi CML170SXW Plus"
        DefaultDepth 24
    
        Subsection "Display"
            Depth       8
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    
        Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Logitech S9" "CorePointer"
        InputDevice "Logitech Office Internet Keyboard" "CoreKeyboard"
    
    EndSection
    
    # Section "DRI"
    #    Mode 0666
    # EndSection

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения